Koch-Chemie Silicon- & Wachsentferner — Silicone, Grease & Wax Remover, 5 L
Professional Silicone, Wax & Grease Remover for Bodyshops & Detailing
Koch-Chemie Silicon- & Wachsentferner is a professional-grade solvent degreaser formulated from refined alcohols and hydrocarbons, engineered for rigorous surface preparation across bodyshops, wrap studios, and premium detailing facilities. It completely dissolves and extracts silicone oils, polishing residues, paraffin waxes, lubricants, and greasy films from all solvent-resistant surfaces, preventing paint cratering and ensuring maximum adhesion for vinyl films and ceramic coatings.
Key Benefits
- Complete Silicone Removal: strips stubborn silicone films, eliminating fish-eyes and cratering defects in refinish painting.
- Optimized for Wraps & PPF: prepares maximum surface energy substrates for high-tack film adhesion without edge lifting.
- Controlled Evaporation: allows adequate dwell time to liquefy heavy oils before flashing off cleanly.
- High Economy Format: professional volume ideal for high-throughput prep bays and studios.
- Substrate Versatility: safe on raw metals, cured paints, glass, and solvent-tolerant trim.
Technical Specifications
| Property | Specification |
|---|---|
| Product Category | Bodyshop silicone & wax solvent degreaser |
| Chemical Base | High-purity alcohols and aliphatic hydrocarbons |
| Application State | Ready-to-use (do not dilute) |
| Substrate Compatibility | Metals, cured clear coats, glass, prep surfaces |
| Residue Behavior | 0% residue after proper wipe-off |
Application Instructions
- Apply product onto a clean, lint-free microfiber cloth or mist directly onto the target surface.
- Wipe the panel systematically to dissolve grease, waxes, and silicone oils.
- Immediately follow with a second fresh, dry microfiber cloth to lift away dissolved residue before it re-dries (two-cloth method).
- Allow the surface to vent thoroughly before proceeding with primer, paint, vinyl wrap, or ceramic coating.
Professional Tip: Always employ the two-cloth method: use the first cloth to dissolve the contaminants and the second dry cloth to absorb them completely, preventing cross-contamination.
Safety instructions
Danger. Highly flammable liquid and vapor. May be fatal if swallowed and enters airways. Causes skin and serious eye irritation. May cause drowsiness or dizziness. Keep away from heat and open flames. Wear protective gloves in well-ventilated areas. IF SWALLOWED: call a doctor immediately, do NOT induce vomiting! Store between +5 °C and +25 °C out of reach of children.
-
Volume5 L
-
PurposeCleaning
-
SurfaceBare metal, clear coats, glass before painting, wraps, or ceramic coatings
Clearcoats, glass, ceramic coatings, solvent-resistant plastics, unpainted metals
Paintwork
Paintwork, bare metal, glass, plastics
Paintwork, glass, ceramic coatings, metal, solvent-resistant surfaces -
Dilution100% Ready to Use (do not dilute with water!)
100% Ready to Use (fast-acting solvent)
Ready to use
Ready to use (RTU)
Ready to use undiluted -
DosageUndiluted; sensitive surfaces up to 1:4 with water
-
Manufacturer article207005
-
Official product nameSilicon- & Wachsentferner
-
Package5 L
-
GTIN4260188683952
-
FormFast-acting liquid solvent formula
Liquid
Liquid solvent
Liquid targeted solvent cleaner
Pure hydrocarbon solvent liquid -
Special featuresBodyshop safe, removes silicone oils and wax films, prevents fisheye defects in paint
Dissolves silicone oils, polishing fillers, old wax coats before ceramic application rapidly, Daimler approved, halogen-free, residue-free evaporation
Dissolves silicone oils, polishing oils, and old sealants before ceramic coating rapidly, residue-free flash-off, Daimler-approved detailing standard
Total removal of silicones, greases, polishing oils, 100% paint adhesion -
Finish effect100% chemically clean surface
Completely clean, decontaminated, degreased surface
Completely decontaminated, clean surface free of adhesive residues
Optically and chemically pure substrate -
BrandKoch-Chemie
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent