Tonyin Premium Microfiber Applicator — 12 × 8 × 4 cm, 2 pcs

Two microfiber applicators for controlled product application

The Tonyin TT35 retail set contains two Premium Microfiber Applicators. The manufacturer lists each applicator as 12 × 8 × 4 cm and describes the tool for spreading wax, sealant, and dressing in an even, thin layer. A clean applicator helps control how much product is used and lowers the risk of marking a surface with grit. The exact fibre blend and internal construction are not published.

How to use

1. Check that the surface and applicator are clean, dry, and free of particles. Use a separate clean applicator when changing products or moving between surfaces.
2. Apply a small amount of a surface-compatible wax, sealant, glaze, or dressing to the microfiber face.
3. Spread a thin, even layer with light, overlapping passes. Add product gradually rather than saturating the pad.
4. Follow the care product’s own instructions for flash time, levelling, or buffing. If a clean wipe is required, use a separate clean microfiber towel.

Contents and care

One retail set contains two applicators; each is listed at 12 × 8 × 4 cm. Product to be applied is not included. After use, remove residue and clean the applicators using a method suitable for microfiber and the product used; dry completely before storage. The official distributor states that no technical data sheet is available, and no specific washing temperature or detergent is published.