Tonyin TP46D — backing plate set, 3 pcs (1.2″ / 2″ / 3″)

Tonyin TP46D backing plate set

This set contains three backing plates in 1.2″, 2″ and 3″ sizes. The official representative catalogue identifies TP46D for M14, M16 and 5/8-11 polisher threads. It is a practical way to keep small, medium and larger pad sizes available for detail work without confusing the kit with Tonyin TP48, which is a separate extension-shaft set.

What is included

• One 1.2″ backing plate
• One 2″ backing plate
• One 3″ backing plate

The supplier's rounded metric dimensions are not used as exact specifications; the sizes above follow the manufacturer's representative catalogue.

How to select and fit

1. Switch off and disconnect the polisher before changing an attachment.
2. Check the spindle thread on your machine. Use a plate only when its thread is compatible with the machine; the published compatible thread standards are M14, M16 and 5/8-11.
3. Select the plate size that matches the polishing pad and the working area. Do not assume that every plate size uses the same thread adapter.
4. Fit the plate according to the polisher manufacturer's instructions, then check that it is securely seated and runs without visible wobble before polishing.

Important

The source does not specify an individual thread-to-size mapping or include polishing pads in the kit. Confirm the required thread and pad attachment with your machine and pad instructions before use. Do not operate damaged or loose equipment.

Package: 3 backing plates, in 1.2″, 2″ and 3″ sizes.