GYEON Q²M Cut — polishing pad

GYEON Q²M Eccentric Cut

A high-quality, durable coarse foam pad developed for fast scratch and oxidation removal with a dual-action polisher. Its controlled correction, beveled edge and centre hole make it suitable for safe work on contoured panels while helping manage heat.

Benefits

• strong correction with controlled handling;
• durable foam for repeated professional use;
• beveled edge for better pressure distribution;
• centre hole to support heat dissipation.

Application

1. Attach the pad centrally to a clean backing plate of a dual-action polisher.
2. Apply 3–4 drops of Q²M Compound or Compound+.
3. Work an area of about 40 × 50 cm: spread at low speed, then increase the speed.
4. Use light to medium pressure and slow overlapping passes.
5. Clean the pad after every panel with a pad brush or compressed air.
6. Wash after use with warm water and a mild cleaner; dry with the foam side down.

Test the combination on a small area first. Do not use this eccentric pad on a rotary polisher.

Available variants

• Eccentric — 80 × 20 mm / 2 pcs
• Eccentric — 145 × 20 mm
• Rotary — 80 × 25 mm / 2 pcs
• Rotary — 145 × 25 mm