GYEON Q²M Prep — pre-coating surface degreaser, 4 L

GYEON Q²M Prep

GYEON Q²M Prep is a professional surface degreaser for preparing a vehicle before applying a ceramic coating, wax or sealant. It removes polishing oils, old wax residue, grease and most fillers while dissolving them, helping create a chemically clean, antistatic surface. This improves the bonding of the new protective layer and makes application more consistent.

Technical data

• volume: 4 L;
• type: pre-coating surface degreaser;
• IPA content: more than 50%;
• consumption: approximately 150 ml per vehicle;
• suitable for paint, glass, plastic and wheels.

Application

1. Work in a well-ventilated area, on a cool surface and away from ignition sources.
2. Spray generously onto the panel or a clean short-pile microfibre towel.
3. Wipe the panel thoroughly with light pressure to dissolve polishing and oily residues.
4. Use a second dry side or a fresh microfibre to buff the surface to a streak-free, clean and slightly grabby finish.
5. Work panel by panel and repeat on heavily polished areas if needed. Wait 5–10 minutes before applying the coating and inspect the surface with a detailing light.

Do not use on hot surfaces or allow the product to dry. Test material compatibility in an inconspicuous area before use.