GYEON Q² Rim EVO — ceramic coating for wheels, 30 ml

GYEON Q² Rim EVO

Q² Rim EVO is a ceramic coating developed specifically for wheels. It protects painted, powder-coated, anodised and polished wheels from brake dust, road grime and chemicals. The coating withstands temperatures above 800°C, reduces contamination bonding and makes wheels easier to wash while maintaining a neutral appearance without unwanted gloss.

Technical data

• capacity: 30 ml;
• consumption: 15–20 ml per wheel set;
• protection: up to 18 months / 45,000 km;
• pH tolerance: 2–11;
• temperature resistance: above 800°C;
• safe for painted, powder-coated, anodised and polished wheels.

Box contents

Q² Rim EVO 30 ml, applicator set and instruction manual.

Application

1. Clean the wheels thoroughly and remove brake dust, iron particles, old protection and other contamination.
2. Dry completely and degrease with Q²M Prep. Wait approximately 15 minutes after degreasing.
3. Apply a generous amount to the included applicator and spread evenly over a small section of the wheel.
4. Depending on temperature, wait approximately 30–60 seconds and carefully wipe off the residue immediately with a clean microfibre.
5. Check the surface with a light to make sure no high spots or smears remain.

Allow the coating to cure in a dry environment for at least 12 hours before the wheels contact water. Maintain with a pH-neutral shampoo and avoid very acidic or alkaline cleaners.