Koch-Chemie Micro Cut M3.02 — Micro Finishing & Antihologram Polish

Koch-Chemie Micro Cut M3.02 — Micro Finishing & Antihologram Compound

Koch-Chemie Micro Cut M3.02 is the definitive machine micro-polishing compound engineered for the permanent elimination of polishing holograms, buffer trails, micro-marring, and fine sanding marks up to P3000 grit. Developed specifically for dark, soft, and sensitive automotive clearcoats, M3.02 delivers an extraordinary, wet-look depth of gloss without using concealing oils, silicones, or artificial fillers.

By employing ultra-pure homogeneous micro-abrasive aluminum oxide crystals that break down smoothly under mechanical friction, M3.02 guarantees genuine defect removal. Even under intense direct sunlight or specialized high-CRI inspection lights, the finish remains completely free of haze and holograms. 100% bodyshop-safe and certified by premier European automakers.

Step-by-Step Professional Application Protocol

1. Ensure the vehicle paint has been pre-corrected and thoroughly wiped clean of heavy compounding dust.
2. Shake the M3.02 bottle thoroughly before dispensing.
3. Prime a clean purple Koch-Chemie Micro Cut Pad with 4 small drops of polish.
4. Distribute the polish evenly over a 40 x 40 cm area at lowest machine speed.
5. Increase machine speed to medium (DA speed 3–4; Rotary ~1000–1200 RPM) and guide the polisher with light-to-moderate pressure in cross-hatch overlapping passes.
6. Once the product turns completely clear and translucent, polish for one additional pass with zero downward pressure (using only the machine's own weight).
7. Wipe off residue gently using an ultra-plush edgeless microfibre towel (Koch-Chemie Polish & Sealing Towel).
8. Degrease the panel with Koch-Chemie Silicon- & Wachsentferner to verify 100% true defect-free finish under inspection LED light.

Pro Detailing Tips, Do's & Don'ts

• DO: Use a Dual Action polisher on ultra-soft sticky Japanese and Porsche paints to eliminate any risk of rotary buffer trails.
• DO: Dedicate separate clean microfibre towels exclusively for the final finishing wipe.
• DON'T: Do not use dirty or previously contaminated pads—any microscopic dust speck can induce micro-marring at this finishing stage.
• DON'T: Do not apply heavy downward pressure; let the micro-abrasives refine the gloss gently.

Volume & Packaging Selection Guide

Choose 250 ml for detailing individual vehicles or boutique projects; select 1 L for commercial detailing centers where flawless mirror finishes are produced daily.