Koch-Chemie Ceramic Glass Cg0.01 glass coating, 50 ml

Koch-Chemie Ceramic Glass Cg0.01 glass coating, 50 ml is a hydrophobic glass protection product for exterior vehicle glass. The offer identifies one bottle of 50 ml.

Use

Prepare clean, dry exterior glass and degrease it. Work at 15–25 °C. Apply a small amount evenly with a suitable applicator. Allow a 12-minute flash-off, then remove residue as directed by the manufacturer. Keep the surface dry for 24 hours; full curing takes 5 days. Water begins to run off at approximately 50 km/h. For subsequent cleaning, use an alcohol-based glass cleaner.

Safety information

Manufacturer SDS classification: signal word Danger; clp pictograms: GHS02, GHS05, GHS07, GHS08. UFI: S630-W09R-100Y-90XQ.

• H226: Flammable liquid and vapour.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.
• H412: Harmful to aquatic life with long lasting effects.

Precautions

Keep away from heat, sparks and open flames; do not smoke. Use outdoors or in a well-ventilated area. Wear protective gloves and eye protection. If swallowed, call a poison centre or doctor immediately and do not induce vomiting. If in eyes, rinse cautiously with water and continue rinsing. Store tightly closed, cool and locked away.

The German manufacturer safety data sheet was reviewed to verify this exact product number and the warnings above; no document is attached to this listing. Follow the label on the supplied container.