SONAX PROFILINE Ceramic Coating CC Vinyl+PPF, 50 ml Kit

About the product

SONAX PROFILINE CC Vinyl+PPF is a one-stage coating for coloured wraps and paint-protection film. The flexible coating is intended to bond to film and provide water and dirt repellence while retaining the appearance of glossy or matt wraps. This 50 ml kit contains four application pads.

Application

Clean the film thoroughly and prepare it with SONAX PROFILINE Prepare. Apply crosswise in a thin, even layer to about 0.5 m² at a time. Wipe off excess immediately with a coating towel. Let the vehicle cure in a clean, dry place for at least 6 hours; SONAX recommends 12 hours for full reaction. Ensure good ventilation.

Pack

One 50 ml set with four application pads. Do not confuse this Vinyl+PPF formula with paint-only ceramic coatings.

Safety information

Warning. H226 Flammable liquid and vapour. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. May hydrolyse to release methanol and ethanol; methanol is toxic and may cause organ damage. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 Do not breathe vapour. P264 Wash thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves and eye/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; continue rinsing. P337+P313 If eye irritation persists: Get medical advice. P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents/container according to local regulations.