Tonyin Headlight Renovation Liquid — vaporizer polymer, 600 ml

600 ml polymer liquid for vaporizer-based headlight renovation

Tonyin TD11B is a 600 ml headlight-renovation polymer liquid sold as a bottle, not as the complete heater, sanding and masking kit. The regional distributor page identifies TD11B and the bottle label shows 600 ml. The supplier's extra “v2” wording is not confirmed on the product page or label, so it is not treated as a model revision.

Typical preparation and application

1. Wash the plastic lens and mask adjacent paint. Progressively wet-sand the lens using the compatible kit's abrasive sequence.
2. Remove sanding residue and dry the surface completely before coating.
3. Use only with a compatible headlight vaporizer and its instructions. A retailer's guidance for this exact 600 ml product describes heating the liquid and applying vapor evenly over the prepared lens; no verified dose, temperature or pass time is published here.
4. Allow the lens and equipment to cool/cure as directed by the compatible device and product label. Do not improvise with the wipe-on TD13 or new-ECO TD12 method.

Safety

The linked 2026 safety data sheet classifies the liquid as a skin sensitizer (H317: may cause an allergic skin reaction). Avoid breathing vapors and wear protective gloves, clothing and eye protection; wash skin with soap and water if exposed. Keep out of reach of children and follow the SDS and bottle label. Confirm the supplied EU label before use because the SDS does not print the TD11B model code.