CARPRO FogFight — Interior Anti-Fog Hydrophilic Glass Coating Kit, 100 ml

CARPRO FogFight: Professional Interior Anti-Fog Glass Coating Kit

CARPRO FogFight is a cutting-edge super-hydrophilic nano-coating engineered specifically to eliminate interior automotive glass condensation and window fogging. Unlike exterior glass treatments that bead water, FogFight employs an advanced hydrophilic mechanism that reduces the surface tension of moisture to zero. Atmospheric humidity and breath condensation cannot bead up into microscopic light-scattering droplets; instead, they flatten into an imperceptible, optically clear continuous sheet of moisture, guaranteeing safe visibility in cold or humid climates.

1. Application Scope & Typical Use Cases

• Surfaces: interior windshields, passenger side glass, rear heated glass, interior mirrors, and motorcycle helmet visors.
• Longevity: provides reliable anti-condensation defense for over one month per single application.
• Visual clarity: leaves no rainbow oily haze, reflections, or headlight distortion during night driving.

2. Key Performance Advantages

• Super-hydrophilic technology: physically prevents moisture droplets from adhering and scattering light.
• Complete installation kit: includes dedicated applicator block and ultra-fine lint-free Suede microfiber cloths.
• Substrate safety: safe on automotive glass, optical polycarbonates, and window tint films.

3. Kit Package Contents

• 100 ml CARPRO FogFight spray bottle.
• CARPRO foam applicator block.
• 2 × Suede microfiber applicator cloths (10 × 10 cm).
• 1 × Suede microfiber finishing towel (20 × 20 cm).

4. Step-by-Step Application Protocol

1. Surface prep: clean glass thoroughly with CARPRO Clarify and wipe with CARPRO Eraser to remove all oils and nicotine film. Glass must be totally dry.
2. Applicator prep: wrap a 10 × 10 cm Suede cloth around the foam applicator block.
3. Application: shake bottle well. Mist FogFight lightly onto the cloth or glass. Spread evenly using overlapping crosshatch motions.
4. Flash time: allow coating to haze for 3 to 5 minutes at ambient room temperature (+20 °C).
5. Buffing: gently buff off haze using the larger 20 × 20 cm Suede towel until completely streak-free. Avoid touching glass after finishing.

5. Critical Do's and Don'ts

• Do not wipe glass with wet towels or aggressive cleaners after treatment, as this removes the hydrophilic film.
• Apply only in dry conditions at temperatures above +10 °C.

6. Technical Specifications Summary