Koch-Chemie Micro Cut & Finish P3.01 — Micro Polish & Carnauba Wax

Micro-Finishing Compound with Integrated Carnauba Wax Protection

Koch-Chemie Micro Cut & Finish P3.01 is an advanced machine micro-polish engineered to permanently eliminate fine polishing marks, holograms, buffer trails, and sanding scratches up to P3000 on all paint systems (including scratch-resistant and soft finishes). Infused with premium natural carnauba wax and non-volatile sealing polymers, it refines the paint to an optical mirror finish while depositing a protective, hydrophobic layer in a single step.

Key Performance Advantages

• Permanent Hologram Elimination: Ultra-fine homogeneous aluminum oxide abrasives permanently cut defects rather than covering them with temporary cosmetic oils.
• Carnauba Wax Sealant: Imparts a warm, deep carnauba wet look with high surface slickness and immediate water-beading performance.
• Economical & Clean: Outstanding lubricity allows long working cycles without drying out or creating abrasive dust.
• Daimler Approved: Certified for professional refinishing and paint correction by major German automotive manufacturers.

Recommended Application Protocol

1. Mount a purple Micro Cut Pad onto a dual-action orbital machine (recommended) or rotary polisher.
2. Apply 3–4 pea-sized drops of P3.01 evenly onto the pad face.
3. Distribute the polish evenly over a 50x50 cm work area with the machine switched off.
4. Polish at medium speed (DA speed 3–4 or rotary 1000–1200 RPM) using cross-hatch passes with light pressure until a thin, transparent film forms.
5. Buff off remaining residue gently using a plush edgeless microfiber cloth.

Technical Specifications