Carbon Collective Oracle Inorganic Ceramic Coating Kit — paint, PPF and trim, 30 ml

Carbon Collective Oracle Inorganic Ceramic Coating Kit — 30 ml

Oracle is a versatile inorganic ceramic coating with strong water repellency and gloss enhancement. It can improve the depth of gloss, satin and matt finishes while making treated surfaces easier to maintain. The coating is suitable for painted surfaces, PPF, vinyl wraps, gel coat, carbon fibre, bare metal, aluminium, stainless steel, plastic grilles, trim and headlights.

Protection and kit contents

The coating provides a 110° water-repelling angle, a draining angle as low as 17°, 3.5H hardness, high chemical resistance and durability of around 2–3 years when correctly applied and maintained. The kit contains one 30 ml bottle, two 75 mm microfibre applicators and foil packaging with instructions.

Application

1. Work above 5 °C in a well-ventilated area, wear protective gloves and avoid direct sunlight. Do not dilute the coating.
2. Prepare the surface thoroughly. Remove waxes, oils, dressings and other residues; a 30% isopropyl alcohol wipe is recommended before application.
3. Apply 2–3 drops to the supplied lint-free applicator and work panel by panel. Divide large panels into sections.
4. Because bonding starts immediately, remove excess with a light microfibre wipe within 2–3 minutes.
5. Use a fresh applicator for each panel where possible. If applying a second coat, wait 2 hours.
6. On plastics, remove silicones and dressings with a 30% IPA mix so the coating can bond correctly.

Maintenance and safety

Maintain with pH-neutral car shampoo, snow foam and suitable citrus degreasers. Avoid acid wheel cleaners and high-pH cleaners. Remove accidental contact with glass, trim and tyres immediately. Avoid contact with eyes and skin, do not ingest and refit the cap tightly after use.