Carbon Collective Microfibre Polishing Compound

Carbon Collective Microfibre Polishing Compound

Microfibre Polishing Compound uses diminishing abrasive technology to cut and refine paint in one controlled step. It starts with strong correction and breaks down into finer particles during use, leaving a high-gloss, low-haze finish without changing to a separate polish or pad.

What it removes

The compound removes oxidation, swirls and scratches up to 1500 grit. It cleans the surface and helps prepare paint for ceramic coating application. It is formulated specifically for microfibre polishing pads so the pad maintains speed under load.

Application

1. Shake well and make sure the paint and pad are clean and free of loose dirt.
2. Apply six dots to the microfibre pad and massage the compound into the pile.
3. Start the machine at its lowest speed and spread the compound across the panel.
4. Increase the speed until the compound begins to turn clear.
5. Remove residue with a soft microfibre and repeat until the desired correction is achieved.

After polishing, blow the compound out of the pad with an airline to speed up cleaning; always inspect the panel under suitable lighting.