Carbon Collective Clear Coat Ceramic Lite — versatile ceramic coating

Carbon Collective Clear Coat Ceramic Lite

Clear Coat Ceramic Lite bridges the gap between a traditional ceramic coating and a spray sealant. It forms a durable hydrophobic layer that enhances and protects paint, wheels, glass, trim, PPF, vinyl, carbon and composite surfaces. The protection lasts up to 12 months or approximately 5000 miles when correctly maintained.

Application

1. Work above 5 °C in a well-ventilated area, out of direct sunlight.
2. Wash, dry and thoroughly clean the surface. Remove waxes and oils; Panel Prep is recommended.
3. Prime the Speed Applicator with two full sprays, then use one spray per panel.
4. Coat one panel in straight overlapping lines and spread the product evenly.
5. Remove excess immediately within 10–20 seconds with a close-loop microfibre cloth.
6. Allow at least 6 hours before the coating gets wet. A second coat can be applied after the recommended interval.

If the coating cures too quickly, work on smaller sections. Do not apply too much product; any residue or smearing can be corrected by re-applying a light amount and wiping again.