Koch-Chemie 1K-Nano — High-Tech Nano Paint Sealant, 250 ml

Professional 1-Component Network Cross-Linking Nano Paint Sealant

Koch-Chemie 1K-Nano is a premier 1-component nano-technology paint sealant certified under stringent Daimler OEM specifications. Unlike traditional organic waxes or polymer sealants that merely sit atop the clearcoat, 1K-Nano chemically cross-links with paintwork clearcoat molecules to establish an ultra-thin, glass-hard protective network that resists harsh wash chemicals (pH 2–12), road salt, industrial fallout, and UV oxidation for up to 36 months.

Key Performance Advantages

• Chemical Covalent Cross-Linking: Bonds irreversibly with clearcoat resins for superior resistance against acid rain, bird droppings, and alkaline wash shampoos.
• Extreme Lotus-Effect Hydrophobicity: Minimizes dirt adhesion so that contaminants are easily carried away by rain or gentle maintenance washes.
• Intense Wet-Look Gloss: Enhances the color brilliance, depth, and optical transparency of clearcoats without holograms.
• Daimler-Zulassung Approved: Tested and certified to Mercedes-Benz long-term paintwork preservation standards.

Recommended Application Protocol

• Substrate Preparation: Thoroughly wash, clay, and polish paintwork hologram-free (e.g. using Heavy Cut H9.02 and Micro Cut M3.02).
• Residue Removal: Wipe down entire vehicle using Koch-Chemie Silicon- & Wachsentferner or Panel Preparation Spray to ensure 100% oil-free clearcoat.
• Machine Application: Apply a small amount of 1K-Nano onto a soft finishing pad (Koch-Chemie Polish & Sealing Pad). Work in overlapping cross-hatch passes with a dual-action polisher at low speed and light pressure.
• Flashing & Leveling: Allow 2–3 minutes flash-off time, then gently remove residue with a clean Polish & Sealing Towel.
• Curing: Allow coating to cure indoors for a minimum of 2 hours before exposing to moisture. Full cure occurs after 24 hours.

Precautions & Pro Tips

• Clean Pre-Degreasing: Never apply over existing wax, glaze, or polishing oil residue; complete pre-cleaning is mandatory for chemical bonding.
• Application Temperature: Apply strictly between +15 °C and +30 °C in a dust-free environment.
• Storage: Store tightly sealed in a dry location between +10 °C and +25 °C. Do not freeze.

Technical Specifications