GYEON Q² Primer — SiO² primer and ultra-fine finishing polish, 1 L

GYEON Q² Primer

Q² Primer is an ultra-light finishing polish and SiO² primer for preparing paintwork before a ceramic coating. It contains no oils or fillers, removes light imperfections and haze, and leaves an ultra-smooth surface that improves coating bonding, gloss and colour depth.

Application

1. Wash, decontaminate and dry the paintwork.
2. Apply a small amount to a soft finishing pad and use a dual-action polisher at low to medium speed.
3. Spread the product evenly over the panel until only a light, transparent haze remains.
4. Gently remove the residue with a clean microfibre towel.
5. If applying a coating immediately, allow the paint to rest for at least 15 minutes.
6. If you do not degrease with Q²M Prep, wait at least 24 hours so the SiO² elements can cure for maximum coating adhesion.

Use a clean pad and towel and check the panel under suitable lighting before coating.