GYEON Q²M PPF Slip — PPF installation fluid, 1 L

GYEON Q²M PPF Slip

GYEON Q²M PPF Slip is a concentrated installation fluid developed for professional PPF and vinyl-wrap application. It creates controlled slip between the film and the surface, allowing the installer to move and align the material accurately before final adhesion while reducing tension during placement.

Application

The solution is suitable for different automotive PPF and vinyl films. Its high concentration allows dilution up to 1:100; the exact ratio depends on the film, panel size, temperature and installer preference.

How to use

1. Dilute the concentrate with demineralised water. Start at up to 1:100 and adjust the slip to the working conditions.
2. Spray the solution generously onto both the panel and the adhesive side of the film.
3. Lay the film onto the surface and adjust its position until the alignment is accurate.
4. Use a squeegee to push excess liquid from the centre towards the edges without stretching the film or creating creases.
5. After final fixation, rinse away residue with water and dry the surface with a soft microfibre cloth.

The product is intended for professional installation work. Before treating the complete panel, test compatibility with the film and adhesive on a small inconspicuous area.