Koch-Chemie Reactivation Shampoo — Acidic Coating Revitalizing Shampoo, 1 L

Koch-Chemie Reactivation Shampoo (Rs): Acidic Coating Rejuvenation Shampoo

Koch-Chemie Reactivation Shampoo is an engineered acidic specialty wash shampoo (pH 1.0 in concentrate) formulated to rejuvenate, unclog, and restore ceramic coatings, sealants, and glass protection layers. Environmental minerals, calcium deposits, hard water stains, and winter road salts form a hydrophilic film over coatings that suppresses water beading. Reactivation Shampoo chemically dissolves these stubborn inorganic bonds without abrading the underlying ceramic network.

1. Intended Purpose & Problem Solving

• Target Surfaces: Ceramic-coated paintwork, quartz sealants, glass coatings, PPF, and painted wheels.
• Contaminants Removed: Limescale, mineral scale, dried water spots, atmospheric fallout, and road de-icing salts.
• Restoration Effect: Completely unclogs coating pores, returning contact angle (>110°) and rapid self-cleaning sheet behavior.

2. Key Features & Technical Advantages

• Acidic Descaling Power (pH 1.0): Safely breaks mineral bonds that conventional neutral or alkaline shampoos cannot touch.
• High Lubricity: Rich lather protects ceramic surfaces from wash scratches during the contact step.
• Body Shop & Detailer Essential: The premier periodic decontamination wash for sealed vehicles every 3–4 months.

3. Application Guidelines & Dilution Ratios

• Two-Bucket Hand Wash: 50 ml shampoo per 10 L of warm water (1:200 dilution ratio).
• Foam Cannon Pre-Wash: Dilute 1:10 with water in the foam bottle (e.g. 100 ml product + 900 ml water).
• Step-by-Step Protocol: Pre-clean heavy dirt with a neutral foam -> Foam or hand wash vehicle with Reactivation Shampoo -> Agitate with microfiber wash mitt -> Allow 1–2 minutes dwell time -> Rinse thoroughly with high-pressure water.

4. Critical Caveats & Safety Instructions

• Material Restrictions: Do not use on bare unlacquered aluminum or raw zinc surfaces.
• Temperature Warnings: Never apply to direct sunlight or hot body panels.
• Drying Hazard: Must never be allowed to dry on the surface. Rinse completely.

5. Technical Specifications