Menzerna One-Step Polish 3in1 — polishing compound, 250 ml

About the product

Menzerna One-Step Polish 3in1 combines correction, high-gloss finishing and short-term protection in one product. It removes sanding marks from up to P3000, swirls and shadows, and is especially practical for used or older vehicles and for polishing beginners.

Application

Use it when a single polishing product should clean up moderate defects, create gloss and leave a protective finish. It can be used by machine or by hand on a prepared automotive paint surface.

Instructions for use

1. Clean the surface thoroughly.
2. Shake the bottle and apply the polish to the Medium Cut Foam Pad.
3. Use a rotary or orbital machine with cross-coating movements, starting with moderate pressure and speed. Reduce both during the final cycles; hand application is also possible.
4. Work the product until only a slightly transparent or oily film remains. Leave it to dry for 5–10 minutes and remove residue with a Premium Microfiber Cloth without pressure.
5. If the finish requires further refinement, reapply the product with a Wax Foam Pad.

Product benefits

• One product for polishing, finishing and sealing.
• Removes P3000 sanding marks, swirls and shadows.
• Cut 5 / gloss 9; service life of the protective effect up to one month according to the product instructions.
• Silicone-free and can be overpainted.

Technical data

• 250 ml; manufacturer reference 22748.281.001.
• Cut 5 / gloss 9; rotary: 1250–1500 rpm at the start and 500–800 rpm towards the end; service life up to one month.
• Store upright at 5–30 °C and protect from frost and direct sunlight, unless a more specific temperature is stated below. Check the surface and product compatibility before use.