Menzerna Heavy Cut Compound 400 GREEN LINE — polishing compound, 1 l

About the product

Menzerna Heavy Cut Compound 400 GREEN LINE is a VOC-free premium abrasive polish for automotive clear coats. Its diminishing abrasives remove sanding marks and deep scratches while working towards a glossy finish, without unpleasant solvent odour. It is suitable for professional detailing and paint shops.

Application

Use it for heavy correction of sanding marks and scratches on automotive paint. The manufacturer specifies a multi-stage process: the compound can be followed by a medium-cut or finish polish when the surface needs further refinement.

Instructions for use

1. Clean the surface thoroughly before polishing.
2. Shake the bottle and apply 3–7 pea-sized drops to a suitable pad for a 40 × 40 cm area, depending on pad diameter.
3. Use a rotary or orbital polisher with the recommended foam or lambswool pad and work in a cross-coating pattern at low speed. Start with firm, even pressure and reduce pressure in the final cycles.
4. Work the compound until only a slightly transparent or oily film remains, then remove residue with a clean microfiber cloth.
5. Inspect the panel. Follow with a medium-cut or finish polish when a higher gloss or hologram-free finish is required.

Product benefits

• Very high abrasion and fast removal of sanding marks.
• VOC-free according to DIN EN ISO 11890-2 and without hazardous volatile solvents.
• No unpleasant solvent odour and low dust formation.
• Cut 8 / gloss 8; suitable for foam and lambswool pads.

Technical data

• 1 L; manufacturer reference 22200.261.001.
• Cut 8 / gloss 8.
• Rotary: 800–1500 rpm at the start and 1800–2000 rpm towards the end; orbital: lower to upper speed range.
• Store upright at 5–30 °C and protect from frost and direct sunlight, unless a more specific temperature is stated below. Check the surface and product compatibility before use.