Koch-Chemie Micro Cut M2.02 — finishing polish, 250 ml images
Koch-Chemie Micro Cut M2.02 — finishing polish, 250 ml
Silicone-oil-free micro polish for haze, holograms, fine scratches and sanding marks from P4000, including on scratch-resistant paint.
What it does
Micro Cut M2.02 is a silicone-oil-free machine micro-polish for polishing haze, holograms, fine scratches and sanding marks from P4000. The manufacturer lists it for all paint systems, including scratch-resistant finishes.
Confirmed specifications
- 250 ml container; manufacturer article 468250.
- Cut 2.5; gloss 9.0.
- For use with a Micro Cut Pad and a high-performance eccentric polisher with at least 15 mm stroke, or a forced-rotation eccentric polisher.
Application
Shake before use and spread an even dose over the pad. Spread the polish at the machine's lowest speed, then work crosswise with medium pressure until a transparent film forms. Do not alternate the pad used for this polish with pads used for other products.
Important
Do not use on hot surfaces, painted plastics or rubber. Protect from frost and excessive heat; check suitability and compatibility first. The TDS and current SDS are attached. Watch Koch-Chemie's official application video (German).
-
Brand
-
ReferenceKOC468250-0.25
-
MPN468250
-
Volume250 ml
-
TypePolishing compound
-
PurposePolishing
-
SurfacePaintwork
-
Manufacturer article468250
-
Official product nameMicro Cut M2.02
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent