Koch-Chemie Teerwäsche A (Tea) — Tar, Bitumen, Tree Sap & Wax Remover
Professional Bitumen, Tar & Cavity Wax Remover
Koch-Chemie Teerwäsche A (Tea) is a specialized solvent engineered from selected hydrocarbons and emulsifiers, specifically developed to rapidly dissolve bitumen splatters, asphalt, tar, tree resin, rubber scuffs, and protective cavity waxes without abrasive rubbing. Formulated completely free from halogenated hydrocarbons and carrying official Daimler (Mercedes-Benz) approval.
Key Benefits
- Superior Solvency Power: dissolves stubborn bitumen drops and sticky tree sap effortlessly.
- Emulsifying Formula: forms a stable emulsion with rinse water, allowing residues to be washed away cleanly without greasy film.
- Clear Coat Safe: completely safe on solvent-resistant automotive paints, glass, and bare exterior plastics when used as directed.
- Official Daimler Approval: certified and approved by Mercedes-Benz laboratories.
- Separator Friendly: quick-separating in commercial oil-water separators conforming to Austrian ÖNORM 5105.
Technical Specifications
| Property | Specification |
|---|---|
| Product Category | Bitumen & tar solvent with emulsifiers |
| Chemical Base | Aliphatic hydrocarbons |
| OEM Approvals | Daimler Approval (Mercedes-Benz) |
| Halogenated Hydrocarbons | None (0%) |
| Usage | Ready-to-use (do not dilute with water) |
Application Instructions
- Apply exclusively to dry, pre-washed surfaces free of loose grit and sand.
- Spray undiluted product evenly onto tar-contaminated areas (lower doors, rocker panels, rear arches).
- Allow to dwell for 3 to 5 minutes. Observe the tar deposits liquefying and running off.
- If necessary, gently agitate stubborn deposits with a solvent-dampened microfiber cloth without excessive pressure.
- Rinse thoroughly with a high-pressure pressure washer, then follow with a standard two-bucket shampoo contact wash.
Professional Tip: Never apply in direct sunlight or on hot panels. Do not allow the solvent to dry out on the paintwork. Avoid use on fresh paint repairs that have cured for less than 4 weeks.
Safety instructions
Danger. Flammable liquid and vapor. May be fatal if swallowed and enters airways. Repeated exposure may cause skin dryness or cracking. Keep away from heat, hot surfaces, sparks, and open flames. Wear protective gloves and eye protection. IF SWALLOWED: immediately call a doctor or poison center. Do NOT induce vomiting. Store in a well-ventilated, cool place between +5 °C and +25 °C.
-
Volume1 L
-
PurposeAdhesive & tar removal
Cleaning -
SurfaceAutomotive paintwork, glass, chassis, chrome, alloy rims
Bodywork
Clearcoats, glass, ceramic coatings, solvent-resistant plastics, unpainted metals
Paintwork & glass
Paintwork, glass, ceramic coatings, metal, solvent-resistant surfaces
Vehicle exterior, lower sills, wheel arches, chassis -
Dilution100% Ready to Use (do not dilute with water!)
100% Ready to Use (fast-acting solvent)
Ready to use
Ready to use (RTU) - undiluted
Ready to use undiluted -
FormFast-acting liquid solvent formula
Hydrocarbon solvent liquid
Liquid solvent
Liquid targeted solvent cleaner
Solvent liquid -
Special featuresDaimler approval · Fast evaporation · Residue-free
Daimler approved, dissolves heavy bitumen, safe for clearcoats, slow flash-off
Daimler approved, dissolves thick road tar instantly, emulsifiable rinse
Dissolves heavy asphalt, road tar, bitumen splatter, and cavity waxes rapidly, Daimler approved, halogen-free, residue-free evaporation
Dissolves heavy road bitumen, asphalt tar, and oil residues rapidly, residue-free flash-off, Daimler-approved detailing standard -
Finish effectClean bitumen-free surface
Completely clean, decontaminated, degreased surface
Completely decontaminated, clean surface free of adhesive residues
Smooth defect-free tar-free paint finish -
BrandKoch-Chemie
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent