Concept Nano Fast Dry Finish — nano drying agent, 5 l

About the product

Concept Nano Fast Dry Finish is a 5 l nano drying agent for automated roller-brush systems and manual low-pressure or pressure-washer use with hot or cold water. The official page describes fast drying, spot-free and streak-free deep gloss; the TDS gives separate manual and machine settings.

Confirmed specification

• Official 5 l article 12605.
• Automated/roller-brush and manual low-pressure or pressure-washer use.
• Manual dilution 50–100:1; machine feed 5–10% according to the official TDS.

Application

1. For manual use, dilute 50–100 parts water according to the official TDS and the current surface/system requirement.
2. For an automatic system, set the chemical feed to 5–10% and calibrate on the actual wash line.
3. Use with hot or cold water as appropriate, then check the spot-free, streak-free drying and deep gloss result.
4. Do not transfer the manual dilution to the machine feed setting; follow the current TDS and safety data.

Important

The product is a drying agent, not a polishing compound. Keep the two application modes separate and validate the setting on the actual equipment and water quality.