Gtechniq PWv2 Panel Wipe — surface preparation cleaner, 500 ml

Gtechniq PWv2 Panel Wipe — surface preparation cleaner

What it is

PWv2 removes polish oils and residues before a coating is applied. The card has 250 ml, 500 ml and 5 L combinations; the cleaner is used on a prepared surface with a clean microfibre.

Application

Use the panel wipe as the final degreasing step before a coating, removing polish oils and residue without leaving a film.

1. Complete washing, decontamination and polishing before this step.
2. Spray onto a clean microfibre rather than flooding the panel.
3. Wipe one section at a time and turn to a clean side.
4. Allow the panel to flash off and inspect it under suitable light.

Technical details

Gtechniq PWv2 Panel Wipe — surface preparation cleaner. PWv2 removes polish oils and residues before a coating is applied. The card has 250 ml, 500 ml and 5 L combinations; the cleaner is used on a prepared surface with a clean microfibre..

Important information

Work with ventilation and keep the surface cool; do not use a dirty cloth that can redeposit oils. Keep the product or accessory clean, closed and stored away from extreme temperatures. Always test compatibility on a small, inconspicuous area before a full application.