Tonyin Protego PPF & Vinyl Wrap Ceramic Coating — 30 ml

Ceramic coating for PPF and vinyl wraps

Tonyin Protego PPF & Vinyl Wrap Ceramic Coating is made specifically for paint-protection film (PPF) and automotive vinyl wraps. It helps preserve the film's appearance, adds gloss and improves water repellency to make routine care easier. The regional Tonyin representative lists protection against UV exposure, acid rain and ageing. Pack size: 30 ml.

Preparation

1. Wash the PPF or vinyl surface thoroughly and remove contamination.
2. Degrease the surface, then make sure it is completely clean and dry.

Application and curing

1. Apply the coating evenly, working one small section at a time.
2. After 1–2 minutes, wipe with a clean, dry microfibre cloth.
3. Two coats are recommended; apply the second after 2 hours. Allow 12 hours for the coating to cure.

After application, do not wet or touch the treated film for 24 hours; for full curing and maximum durability, do not wash the vehicle for 7 days. The regional Tonyin representative says the vehicle may be used after 2 hours, while the curing and contact restrictions above still apply. Read the package safety instructions before use.