Tonyin TT02A Snow Foam Cannon — pressure-washer foam lance, 1 L

Pressure-washer foam cannon with 1 L bottle

Tonyin TT02A connects to a compatible pressure-washer gun to apply wash foam. It has a brass fitting, an M22 male inlet with 14 mm internal diameter and a 1/4-inch outlet quick disconnect. The pressure-washer gun is not included.

How to use

1. Before purchase, check that your washer gun and hose match the M22-14 mm inlet and that the 1/4-inch outlet connector suits your setup. Never force a mismatched fitting.
2. Prepare a car-wash shampoo solution according to its label and fill the 1 L bottle without exceeding its marked capacity.
3. Switch off and depressurise the washer before connecting the cannon. Start from a safe position, check for leaks and apply foam to a cool vehicle surface from a suitable distance.
4. Do not let detergent dry on the surface. Rinse thoroughly and release system pressure before disconnecting or servicing the cannon.

Compatibility and limits

A pressure washer is required; this is not an attachment for a standard garden hose. Maximum pressure is 3000 PSI and maximum temperature is 140 °F (about 60 °C). Do not exceed the lower pressure or temperature rating of any washer, hose, gun or connector in your setup.