CARPRO DHydrate — Twisted Loop Microfibre Drying Towel
Price:
€14.25
Tax included
CARPRO DHydrate is an ultra-absorbent twisted-loop microfibre drying towel engineered to effortlessly glide across paint and glass, sucking up standing water instantly without marring or streaks.
CARPRO DHydrate — Twisted Loop Microfibre Drying Towel
CARPRO DHydrate is a cutting-edge automotive drying towel designed specifically to eliminate friction and swirl risks during the post-wash drying phase. Engineered with a specialized twisted-loop pile structure and a high-blend 80/20 polyester/polyamide composition, DHydrate pulls water droplets off vehicle panels like a magnet. Unlike heavy plush pile towels that drag and create high surface friction or waffle weaves that can leave water streaks, DHydrate glides smoothly across ceramic coatings, waxes, and bare clearcoats, absorbing litres of water without requiring downward pressure.
| Technical Specification | Laboratory Rating |
|---|---|
| Weave Structure | Twisted-loop microfibre construction on one side, flat weave on reverse |
| Fabric Blend | 80% Polyester / 20% Polyamide premium split microfibre |
| Weight / Density | 540 GSM (High absorbency to weight ratio) |
| Edge Treatment | Soft scratch-free microsuede edge binding |
| Absorption Capacity | Absorbs over 7x its dry weight in water |
| Safe Substrates | Soft clearcoats, ceramic coatings, PPF, vinyl wraps, glass |
| Maintenance | Machine washable with CARPRO MFX at 30–40°C |
Key Advantages & Engineering
- Twisted-Loop Capillary Action: Twisted yarn strands act as microscopic water siphons, pulling moisture deep into the inner towel core instantly.
- Ultra-Low Surface Drag: Minimizes drag resistance across paint, preventing friction-induced wash marring even on the softest Japanese solid black clears.
- Soft Microsuede Edge: Bound in plush suede fabric, completely eliminating sharp stitched edges or scratch hazards.
- Lint & Streak-Free Drying: Leaves glass, chrome trim, and high-gloss paint 100% streak-free on the very first pass.
Step-by-Step Professional Usage & Care Protocol
- After rinsing the vehicle, flood rinse panels with an open hose to sheet off 80% of standing water.
- Unfold CARPRO DHydrate and place it flat across a wet panel (hood or roof).
- Gently take hold of two corners and drag the towel slowly toward you without applying any downward pressure.
- Watch the water disappear completely beneath the towel in a single glide pass.
- Wring out if saturated and continue drying remaining panels, glass, and door jambs.
- Care Instructions: Machine wash separately using CARPRO MFX detergent at 30°C. Do not use fabric softeners or bleach. Air dry or tumble dry on low heat.
Pro-Tips & Important Warnings
- No Scrubbing: Never scrub or rub back and forth with a drying towel; always use smooth, linear drag motions.
- Separate Glass & Wheels: Do not use the same towel on dirty door jambs or wheels to avoid cross-contamination.
Volume Selection Guide
- 500 × 550 mm (Compact): Agile and lightweight, perfect for sports cars, hatchbacks, vertical doors, and glass.
- 700 × 1000 mm (XL Format): Heavyweight capacity, easily dries entire large SUVs, estates, or trucks without wringing out once.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent