CARPRO ImmoGel — Concentrated PPF Installation Gel Lubricant, 500 ml

CARPRO ImmoGel — Concentrated PPF Installation Gel Lubricant, 500 ml

CARPRO ImmoGel is a high-performance installation lubricant specifically formulated for the application of Paint Protection Film (PPF) and vinyl wraps. Unlike soapy water, baby shampoo, or makeshift slip solutions that leave cloudy residues, degrade acrylic pressure-sensitive adhesives (PSA), or cause adhesive distortion and silvering, ImmoGel provides high cling viscosity, extended working wet-tack time, and effortless squeegee glide. It evaporates cleanly without leaving optical haze or milky shadows beneath clear films.

Key Advantages & Chemistry

• Extended Wet-Tack Window: Holds positioning film freely during alignment on complex curved body panels before squeegee pressure locks it down.
• Prevents Silvering & Adhesive Distortion: Lubricates the adhesive side uniformly, preventing premature localized tacking that creates ugly adhesive lines.
• High Cling on Vertical Panels: Unlike thin soapy water that runs off immediately, ImmoGel clings to vertical panels (doors, fenders), reducing re-wetting frequency.
• Zero Residue & High Clarity: Leaves no soap scum or surfactants trapped under the film, ensuring OEM paint brilliance and color depth remain untouched.

Step-by-Step Professional Application Protocol

1. Thoroughly decontaminate and polish the vehicle paint, ensuring zero dust or wax residues remain.
2. Dilute CARPRO ImmoGel with distilled or demineralized water in a pressurized sprayer (1:100 dilution: 10 ml per 1 Liter of water).
3. Mist the solution liberally over the vehicle panel and both sides of the PPF film after peeling the backing liner.
4. Position the film on the panel; the gel allows smooth floating and repositioning.
5. Using a soft PPF squeegee (such as CARPRO Immortal Squeegee), push the gel out from the center toward the edges with firm, overlapping passes.
6. For high-tension edges and corners, flush edge zones with pure distilled water or a 10% isopropyl alcohol tack solution to lock the adhesive.
7. Wipe the surface clean with a soft microfiber towel and inspect.

Pro-Tips & Important Warnings

• Water Quality: Always dilute ImmoGel with pure distilled or demineralized water. Tap water minerals can cause white water spotting under clear film.
• Clean Environment: Always work in a temperature-controlled, dust-free environment (20–25°C).