Carbon Collective SiO2 Ceramic Shampoo — pH-neutral shampoo with protection, 500 ml

Carbon Collective SiO2 Ceramic Shampoo — 500 ml

SiO2 Ceramic Shampoo is a slick, pH-neutral wash shampoo that cleans while leaving a sacrificial silica-based protective layer. It is designed to maintain ceramic-coated paintwork, restore the coating’s protective behaviour and add gloss and water sheeting, but it is also suitable for unprotected vehicles as a one-step wash-and-protect product. The low-foaming formula rinses easily and helps reduce water spotting and drying time.

Key properties

• pH-neutral and highly concentrated
• SiO2 protection for coated and unprotected paint
• Deep cleaning that lifts bonded contamination from protected surfaces
• Rinse-aid effect to improve water sheeting
• Durability up to 3 months depending on conditions and maintenance

Bucket application

1. Add 50 ml to a wash bucket and fill with 12 litres of warm water. This is approximately ten washes from a 500 ml bottle.
2. Pre-rinse the vehicle and wash from top to bottom in straight lines with a clean wash mitt.
3. Rinse vigorously until the water runs clear. Repeat the wash for an additional layer of protection, gloss and durability.

Wash-mitt application

After a pre-wash, use the two-bucket method. Add 50 ml to the wash bucket, then apply a few drops directly to the wet mitt or pad. Work panel by panel, topping up the mitt when needed, and rinse thoroughly when the entire vehicle has been treated.

Snow-foam lance application

After pre-washing, add 50 ml to the lance bottle and dilute with 500 ml of water. Apply over the vehicle, wipe panel by panel with the wash mitt and rinse vigorously. In warm weather or direct sun, rinse each panel immediately after application. Optional: add 10–20 ml of Lusso Shampoo to the bucket for extra foaming.