Carbon Collective Refresh Acidic Shampoo — decontamination shampoo, 500 ml

Carbon Collective Refresh Acidic Shampoo — 500 ml

Refresh is a concentrated acidic shampoo for deep cleaning protected surfaces. It dissolves traffic film, mineral deposits, watermarks, road salt and bonded organic contamination that can clog a ceramic coating or sealant and reduce gloss and hydrophobic performance. It can also strip old waxes and sealants before machine polishing or applying fresh protection.

How it works

The formula combines acids, detergents, emulsifiers and lubricants. Used neat, it has a pH of 2.7 for intensive decontamination. Once diluted, it becomes a strong deep-cleaning shampoo suitable for regular maintenance of coated exterior surfaces. Monthly use is recommended by the manufacturer to remove buildup and keep protected surfaces performing correctly.

Dilution and application

Begin with snow foam and rinse thoroughly. For bucket washing, add 50 ml to 12 l of warm water for approximately pH 6.2, or 100 ml to 12 l for approximately pH 6.0. Wash from the top down in straight lines with a suitable wash mitt or pad, then rinse until the water runs clear. For a snow-foam lance, use 50 ml in 950 ml of water for approximately pH 6.5, or 100 ml in 900 ml for approximately pH 6.2. For maximum decontamination or wax/sealant removal, apply directly to the wash mitt.

Important conditions

Do not use in direct sunlight or on hot surfaces. Work in sections, do not allow the shampoo to dry and rinse thoroughly after washing. Keep the 500 ml bottle closed when not in use.